Comparison of new and existing algorithms for the analysis of 2D radioxenon beta gamma spectra

The aim of this paper is to compare radioxenon beta–gamma analysis algorithms using simulated spectra with experimentally measured background, where the ground truth of the signal is known. We believe that this is among the largest efforts to date in terms of the number of synthetic spectra generated and number of algorithms compared using identical spectra. We generate an estimate for the minimum detectable counts for each isotope using each algorithm. The paper also points out a conceptual model to put the various algorithms into a continuum. Our results show that existing algorithms can be improved and some newer algorithms can be better than the ones currently used.

     

An open source ion gate pulser for ion mobility spectrometry

Excluding the ion source, an ion mobility spectrometer is fundamentally comprised of drift chamber, ion gate, pulsing electronics, and a mechanism for amplifying and recording ion signals. Historically, the solutions to each of these challenges have been custom and rarely replicated exactly. For the IMS research community few detailed resources exist that explicitly detail the construction and operation of ion mobility systems. In an effort to address this knowledge gap we outline a solution to one of the key aspects of a drift tube ion mobility system, the ion gate pulser. Bradbury-Nielsen or Tyndall ion gates are found in nearly every research-grade and commercial IMS system. While conceptually simple, these gate structures often require custom, high-voltage, floating electronics. In this report we detail the operation and performance characteristics of a wifi-enabled, MOSFET-based pulser design that uses a lithium-polymer battery and does not require high voltage isolation transformers. Currently, each output of this circuit follows a TTL signal with ~20 ns rise and fall times, pulses up to +/? 200 V, and is entirely isolated using fiber optics. Detailed schematics and source code are provided to enable continued use of robust pulsing electronics that ease experimental efforts for future comparison.     

Utilizing Paper-Based Devices for Antimicrobial-Resistant Bacteria Detection

Antimicrobial resistance (AMR), the ability of a bacterial species to resist the action of an antimicrobial drug, has been on the rise due to the widespread use of antimicrobial agents. Per the World Health Organization, AMR has an estimated annual cost of USD 34 billion in the US and is predicted to be the number one cause of death worldwide by 2050. One way AMR bacteria can spread, and by which individuals can contract AMR infections, is through contaminated water. Monitoring AMR bacteria in the environment currently requires that samples be transported to a central laboratory for slow and labor intensive tests. We have developed an inexpensive assay using paper-based analytical devices (PADs) that can test for the presence of β-lactamase-mediated resistance. To demonstrate viability, the PAD was used to detect β-lactam resistance in wastewater and sewage and identified resistance in individual bacterial species isolated from environmental water sources.     

Heterogeneous surface-to-air missile defense battery location: a game theoretic approach

In the context of an air defense missile-and-interceptor engagement, a challenge for the defender is that surface-to-air missile batteries often must be located to protect high-value targets dispersed over a vast area, subject to which an attacker may observe the disposition of batteries and subsequently develop and implement an attack plan. To model this scenario, we formulate a two-player, extensive form, three-stage, perfect information, zero-sum game that accounts for, respectively, a defender’s location of batteries, an attacker’s launch of missiles against targets, and a defender’s assignment of interceptor missiles from batteries to incoming attacker missiles. The resulting trilevel math programming formulation cannot be solved via direct optimization, and it is not suitable to solve via full enumeration for realistically-sized instances. We instead adapt the game tree search technique Double Oracle, within which we embed either of two alternative heuristics to solve an important subproblem for the attacker. We test and compare these solution methods to solve a designed set of 52 instances having parametric variations, from which we derive insights regarding the nature of the underlying problem. Enhancing the solution methods with alternative initialization strategies, our superlative methodology attains the optimal solution for over 75% of the instances tested and solutions within 3% of optimal, on average, for the remaining 25% of the instances, and it is promising for realistically-sized instances, scaling well with regard to computational effort.     

Structural and Electronic Influences on Rates of Tertpyridine−Amine CoIII−H Formation During Catalytic H2 Evolution in an Aqueous Environment

In this work, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co^II−Cl]⁺ species results in the formation of [Co^II(κ⁴-L)(OH₂)]²⁺. Further reduction produces [Co^I(κ⁴-L)(OH₂)]⁺, which undergoes a rate-limiting structural rearrangement to [Co^I(κ⁵-L)]⁺ before being protonated to form [Co^III−H]²⁺. The rate of [Co^III−H]²⁺ formation is similar for all complexes in the series. Using E_1/2 values of various Co species and pK_a values of [Co^III−H]²⁺ estimated from PR experiments, we found that while the protonation of [Co^III−H]²⁺ is unfavorable, [Co^II−H]⁺ reacts with protons to produce H₂. The catalytic activity for H₂ evolution tracks the hydricity of the [Co^II−H]⁺ intermediate.     

Match statistics for sequence-based alleles in profiles from forensic PCR-mps kits

The first autosomal sequence-based allele (aka SNP-STR haplotype) frequency database for forensic massively parallel sequencing (MPS) has been published, thereby removing one of the remaining barriers to implementing MPS in casework. The database was developed using a specific set of flank trim sites. If different trim sites or different kits with different primers are used for casework, then SNP-STR haplotypes may be detected that do not have frequencies in the database. We describe a procedure to address calculation of match probabilities when casework samples are generated using an MPS kit with different trim sites than those present in the relevant population frequency database. The procedure provides a framework for comparison of any MPS kit or database combination while also accommodating comparison of MPS and CE profiles.     

Poly (methyl methacrylate) grafted wheat straw for economical and eco-friendly treatment of oily wastewater

Cellulose - The sustainable development of oil–gas and petrochemical industries necessitates the development of cost-effective and eco-friendly technologies to treat mass-produced oily...     

空心NiCo2S4纳米球助催化剂担载ZnIn2S4纳米片用于可见光催化制氢

纳米片与空心球上之间的合理界面调控是开发高效太阳能制氢光催化剂的潜在策略。在各类光催化材料中,金属硫化物由于具有相对较窄的带隙和优越的可见光响应能力而被广泛研究。ZnIn₂S₄是一种层状的三元过渡金属半导体光催化剂,其带隙可控(约2.4 eV)。在众多金属硫化物光催化剂中,ZnIn₂S₄引起了广泛兴趣。然而,单纯的ZnIn₂S₄光催化活性仍然相对较差,主要是因为光生载流子的复合率较高、迁移速率较慢。在半导体光催化剂上负载助催化剂是提升光催化剂性能的一种有效方法,因为它不仅可以加速光生电子和空穴的分离,而且还可以降低质子还原反应的活化能。作为一种三元过渡金属硫化物,NiCo₂S₄表现出较高的导电性、较低的电负性、丰富的氧化还原特性以及优越的电催化活性。这些特性表明,NiCo₂S₄可以作为光催化制氢的助催化剂,以加速电荷分离和转移。此外,NiCo₂S₄和ZnIn₂S₄都属于三元尖晶石的晶体结构,这可能有助于构建具有紧密界面接触的NiCo₂S₄/ZnIn₂S₄复合物,从而提高光催化性能。本文中,将超薄ZnIn₂S₄纳米片原位生长到非贵金属助催化剂NiCo₂S₄空心球上,形成具有强耦合界面和可见光吸收的NiCo₂S₄@ZnIn₂S₄分级空心异质结构光催化剂。最优NiCo₂S₄@ZnIn₂S₄复合样品(NiCo₂S₄含量：ca. 3.1%)的析氢速率高达78 μmol·h^-1,约是纳米片组装ZnIn₂S₄光催化剂析氢速率的9倍、约是1% (w, 质量分数)Pt/ZnIn₂S₄样品析氢速率的3倍。此外,该复合光催化剂在反应中表现出良好的稳定性。荧光和电化学测试结果表明,NiCo₂S₄空心球是一种有效的助催化剂,可促进光生载流子的分离和传输,并降低析氢反应的活化能。最后,提出了NiCo₂S₄@ZnIn₂S₄光催化析氢的可能反应机理。在NiCo₂S₄@ZnIn₂S₄复合光催化剂中,具有高导电性的NiCo₂S₄助催化剂可快速接受ZnIn₂S₄上的光生电子,用以还原质子生成氢气,而电子牺牲剂TEOA捕获光生空穴,进而完成光催化氧化还原循环。该研究有望为基于纳米片为次级结构的分级空心异质结光催化剂的设计合成及其光催化制氢研究提供一定的指导。     

Chemical convective instability and quasi-equilibrium thermodynamics

Summary A nonlinear stability analysis is described for the Bénard problem for a chemically reacting fluid heated from above; the findings are compared with those of Wollkind & Frisch. Next an energy stability analysis is given for the model of Wollkind & Frisch and it is shown that instabilities may occur.

---

Sommario Si sviluppa un'analisi non lineare della stabilità per il problema di Bénard relativo ad un fluido chimicamente reagente e riscaldato dall'alto; i risultati sono confrontati con quelli trovati in precedenza da Wollkind & Frisch. Successivamente si elabora un'analisi non lineare della stabilità proprio per il modello di Wollkind & Frisch e si mostra che si possono presentare delle instabilità.